Auto Scan
Set the scan angle and speed, then let PRO sweep the water automatically.
Wireless automatic rotator
Targex PRO
€1,899
Auto Scan · Target Lock · Full Wireless Control · Instant Manual Override
Competition-grade forward-beam control.
Auto Scan covers the water, while Target Lock keeps the beam on structure or suspended fish as the boat changes bearing. Wireless controls ensure an instant response when the fish moves.
- Wireless control
- Foot pedal, master remote and rod remote
- Automatic functions
- Auto Scan + Target Lock
- Instant manual override
- Direct control with no clutch or power needed
- Built tough
- Stainless steel and waterproof construction
Features
Target Lock
Keeps the beam aimed at underwater structure or suspended fish, even as the boat changes bearing.
Wireless Remote Controls and Foot Pedal
Control the beam hands-free from the wireless pedal or handheld remotes.
Rod-Mounted Wireless Remote
Adjust beam direction while following fish and working your lure.
Automatic Sleep and Wake
Saves power after two hours without input and wakes from any control.
Powered Rotation Stop
Stops powered rotation if cable tension develops.
Motorized and Manual Beam Control
Use powered steering, then take instant manual control whenever conditions demand it.
Adjustable Rotation Speed
Choose slower, precise movement for presentation or faster rotation for scanning.
Pointer-to-Beam Precision
The fixed transducer mount and factory-calibrated pointer stay aligned with the forward-beam centre.
Mount on Either Side of the Boat
Mount on either gunwale while keeping the transducer correctly oriented when stowed.
Compatible with Gunwale Track Systems
Fits compatible gunwale tracks; add the Targex Track Rail where a track is not installed.
Accidental Dismount Protection
A locking safeguard helps keep the rotator securely mounted on the boat.
Inversion Mount
Invert the mount inside the boat for protected, low-profile transport.
Four-Way Boat Tilt Compensation
Fine-tune vertical alignment to maintain stable sonar readings as the boat tilts.
Integrated Bubble Level
A quick visual reference for setting the transducer to its ideal vertical position.
Built Tough
All-stainless-steel construction for demanding freshwater and marine fishing.
100% Waterproof Construction
Fully sealed for dependable operation in wet fishing conditions.
All Live-Sonar Compatible
Works with Garmin, Lowrance and Humminbird live-sonar systems with the correct transducer mount.
Spiral Cable Protector
A supplied spiral protector secures the sonar cable along the rotator shaft.
2-Year Replacement Guarantee
If a covered repair is needed within two years of purchase, Targex replaces the rotator.
Controls
Control Targex PRO your way
Wireless Foot Control
Steer left or right without taking either hand off the rod. No control cable or pairing is required.
Six-Button Master Remote
Control power, left, right, Auto Scan, scan range and Target Lock.
Four-Button Rod Remote
Keep left, right, Auto Scan and Target Lock on the rod while working the lure.
Motor-Housing Speed Control
Set rotation speed with the electrical rotary control on top of the motor housing.
Immediate Manual Control
Turn the knob or pointer by hand at any time, with no clutch or special mode.
Automatic Sleep and Wake
PRO sleeps after two hours without input and wakes from any control.
Installation guide
Install Targex PRO
Install the mounting base
Choose the boat side and secure the Quick-Release Mounting Base to the gunwale, platform, track bracket or clamp.
Insert and lock the mount
Slide in the Tilt-and-Stow Mount, confirm automatic locking and select the required clearance position.
Attach, power and test the motor
Fasten the motor housing, connect it to the boat’s 12 V battery and test all wireless controls.
Assemble the pointer and pole
Fit the pointer and one or both included 60 cm pole sections for the required deployment length.
Fit the transducer and protect its cable
Install the correct fixed mount, route the cable and fit the supplied spiral wrap.
Product videos
Beam control and use
Keep the target and lure inside the forward beam
The beam-positioning principle stays the same; the control method is specific to this model.
Forward live-sonar fishing in action
Use the selected control method to keep the beam directed toward the target.
Specifications
- Product
- Targex PRO
- Power supply
- 12 V DC
- Motor rating
- 14 W
- Motor current
- 3.4 A
- Typical energy use
- Approx. 0.3 Ah per hour
- Recommended fuse
- 5 A
- Included pole sections
- Two 60 cm stainless-steel sections
- Assembled pole options
- Approx. 80 cm or 130 cm
- Mounting adjustment
- Seven positions; up to 8 cm clearance adjustment
- Pointer alignment
- Factory calibrated to within 0.1° of forward-beam centre
- Auto Scan ranges
- 60°, 120°, 180° and 240°
- Cable protection
- Automatic Anti-Coil stop plus spiral cable wrap
- Construction
- All-stainless-steel mechanical structure
- Controls
- Wireless foot control, master remote, rod remote and manual override
- Control modes
- Manual, powered left/right, Auto Scan and Target Lock
- Power management
- Automatic sleep after two hours; wake from any control
- Water protection
- Waterproof for normal above-water operation; do not immerse
- Warranty
- 2-year replacement warranty
- Returns
- 30-day money-back guarantee
In the box
- 01Quick-Release Mounting Base
- 02Quick-Release Tilt-and-Stow Mount
- 03Targex PRO motor housing with 12 V power cable
- 04Factory-calibrated stainless-steel pointer with bubble level
- 05Two 60 cm stainless-steel pole sections
- 06Fixed transducer mount for Garmin LVS34
- 07Replaceable toothed insert for Garmin LVS42 and LVS44
- 08Wireless foot control
- 09Six-button master remote
- 10Four-button rod-mounted remote
- 11Spiral transducer-cable protector