Direct Manual Control
Turn the pointer or control knob to steer the beam immediately.
Where to buy →






Manual sonar rotator
Direct Manual Control
Direct manual forward-beam control.
Core is most effective with a fishing partner: one steers the beam while the other works the target fish. Solo operation is more demanding because rod, reel and lure action need both hands.
Turn the pointer or control knob to steer the beam immediately.
The mechanical design is always ready on the water.
The factory-aligned pointer indicates the forward-beam centre.
Mount on either gunwale while keeping the transducer correctly oriented when stowed.
Fits compatible gunwale tracks; add the Targex Track Rail where a track is not installed.
A locking safeguard helps keep the rotator securely mounted on the boat.
Invert the mount inside the boat for protected, low-profile transport.
Fine-tune vertical alignment to maintain stable sonar readings as the boat tilts.
A quick visual reference for setting the transducer to its ideal vertical position.
All-stainless-steel construction for demanding freshwater and marine fishing.
Fully sealed for dependable operation in wet fishing conditions.
Works with Garmin, Lowrance and Humminbird live-sonar systems with the correct transducer mount.
A supplied spiral protector secures the sonar cable along the rotator shaft.
If a covered repair is needed within two years of purchase, Targex replaces the rotator.
Controls
Follow the pointer for direct manual beam positioning.
Choose the manual-control setup that suits your fishing style.
Installation guide
Fix the Quick-Release Mounting Base to the gunwale, platform, track bracket or clamp.
Slide in the Tilt-and-Stow Mount and confirm the automatic lock.
Attach the factory-aligned pointer and pole sections for the required deployment length.
Install the correct transducer mount and route its cable with the spiral protector.
Product videos
The beam-positioning principle stays the same; the control method is specific to this model.
Use the selected control method to keep the beam directed toward the target.